Avaya 1165E IP Deskphone
3. Your Avaya 1165E IP Deskphone can be powered by standard IEEE 802.3af Power
298
IP Deskphones Fundamentals
Figure 59: Stand cover removed
over Ethernet (Classification 2) or by AC power. To use Power over Ethernet, where
power is delivered from the Ethernet Switch over the LAN cabling infrastructure to
the phone (IEEE 802.3af), additional use of AC power is not supported.
To use local AC power, the approved global power supply (NTYS17xx6) can be
ordered from Avaya. A standard IEC cable, with country-specific plug, is also
required for use with the global power supply for local AC powering. To use local
power, connect the global power supply to the AC adapter jack in the bottom of the
IP Phone. Form a small bend in the cable, and then thread the adapter cord through
the channels in the stand.
Comments? infodev@avaya.com
February 2013