Avaya 1110 Fundamentals page 368

Features
5. Press the Down navigation key to open list box.
6. Use the Up/Down navigation keys to scroll and highlight one of the following options:
7. Tap the Apply&Reset soft key to save the changes and to restart the IP Deskphone.
When the IP Deskphone restarts, the firmware reads the setting for Full Duplex mode and sets
the LAN Ethernet port, PC Ethernet port, duplex, and speed accordingly.
Use the following procedure to confirm activation of Full Duplex mode.
Checking Ethernet Statistics for Avaya 2007 IP Deskphone
1. Tap the Tools icon.
2. Tap the Local Diagnostics soft key.
3. Tap the Ethernet Statistics soft key.
UseEnabling Full Duplex mode for Avaya IP Deskphones 1120E/1140E/1150E
to enable Full Duplex mode on the Avaya 1110 IP Deskphone, Avaya 1120E IP Deskphone,
Avaya 1140E IP Deskphone, and Avaya 1150E IP Deskphone.
Enabling Full Duplex mode for Avaya IP Deskphones 1120E/1140E/1150E
1. Double-press the Services key to open the Local Tools menu.
2. Press 3 on the dialpad to access the Network Configuration dialog.
3. Press the right navigation key until the Ntwk Port Duplex item is highlighted.
4. Press Enter to start the edit mode.
5. Press the Down navigation key to open list box.
6. Use the Up/Down navigation keys to scroll and highlight one of the following options
368 IP Deskphones Fundamentals
• 10BT Full—10 BT Full Duplex mode
• 100BT Full—100 BT Full Duplex mode
The firmware settings are read and are applied to UPLINK and the PC Ethernet
Port.
The following statistics are displayed:
• Link: Up
• Duplex: Full
• Speed: 10 (Mb) or 100 (Mb)
• Auto-Negotiate Capability: N
• Auto-Negotiate Completed: N
Note:
The Ntwk Port Speed item must be set to 10BT or 100BT first.
• Force Full - forced full duplex mode
• Force Half - forced half duplex mode
Comments? infodev@avaya.com
on page 368
February 2013