Avaya 1110 Fundamentals page 77

Figure 14: Avaya 1210 IP Deskphone connections
2. Connect the handset:
3. Connect the headset (optional):
IP Deskphones Fundamentals
a. Align the bottom tabs on the foot stand with the position 1 slots or the
position 2 slots on the back of your IP Phone. In position 1 the IP Phone
sits at a 25-degree angle. In position 2 the IP Phone sits at a 55-degree
angle.
b. Press the footstand into the slots until it snaps into place.
a. Plug the end of the handset cord with the short straight section into the
handset.
b. Plug the other end of the handset cord with the long straight section into
the handset jack marked with the handset symbol on the back of the IP
Phone.
c. Thread the cord through the channel in the footstand (if installed) so that
it exits on the side of the foot stand (optional).
Installation and configuration
February 2013 77