Replacing An Avaya 1165E Ip Deskphone - Avaya 1110 Fundamentals

3. Press OK when the node number displays.
4. Enter the password at the password screen, and press OK.
5. Select the Clear soft key to clear the existing TN.
6. Enter the new TN.

Replacing an Avaya 1165E IP Deskphone

Important:
Two IP Phones cannot share the same TN. You must remove the Avaya 1165E IP
Deskphone that currently uses the TN.
Replacing an Avaya 1165E IP Deskphone
1. Obtain the node and TN information of the phone you want to replace.
2. Disconnect the Avaya 1165E IP Deskphone that you want to replace.
3. To install the Avaya 1165E IP Deskphone, complete
4. Enter the same TN and Node Number as the Avaya 1165E IP Deskphone you
IP Deskphones Fundamentals
b. Set the password as non-NULL.
If
the node password is enabled and is
not NULL
the node password is disabled
A TN screen displays.
To obtain the password, enter the nodePwdShow command in Business Element
Manager. For further information, see Avaya Business Element Manager System
Reference - Administration, NN43001-632.
IP Deskphone on page 296. To configure the Avaya 1165E IP Deskphone, see
Manual provisioning of Avaya 2007 IP Deskphone and Avaya 1100 Series IP
Deskphones on page 503.
replaced. The Call Server associates the new Avaya 1165E IP Deskphone with the
existing TN.
Replacing an Avaya 1165E IP Deskphone
Then
a password screen displays. Go to step
4.
a TN screen displays. Go to step 5.
Configuring the Avaya 1165E
February 2013 303