Avaya 1110 Fundamentals page 278

Avaya 1150E IP Deskphone
3. Connect the global power supply (optional). Leave the global power supply
278 IP Deskphones Fundamentals
Figure 53: Remove the stand cover
unplugged from the power outlet, connect the global power supply to the AC adapter
jack in the bottom of the phone. Form a small bend in the cable, and then thread
the global power supply cord through the channels in the stand.
Warning:
Use your Avaya 1150E IP Deskphone with the approved Avaya global power
supply (model number NTYS17xxE6).
The Avaya 1150E IP Deskphone supports both AC power and Power over Ethernet
options, including IEEE 802.3af Power Classification 3. To use Power over Ethernet,
where power is delivered over the CAT5-e cable, the LAN must support Power over
Ethernet, and a global power supply is not required. To use local AC power, the
optional global power supply can be ordered separately.
You must use CAT5-e (or later) cables if you want to use Gigabit Ethernet.
Comments? infodev@avaya.com
February 2013