Avaya 1110 Fundamentals page 453

Use the following procedures to configure all parameters or specific parameters to automatic
provisioning or manual provisioning for a text user interface.
Configuring parameters automatically for text user interface
1. Press Auto on the Configuration page to switch to the Auto Provisioning page.
2. Perform one of the following actions:
3. Press Enter to save the settings or press Cancel to exit the Network Configuration
Configuring parameters manually for text user interface
1. Press Auto on the Configuration page to switch to the Auto Provisioning page.
2. Perform one of the following actions:
3. Press Enter to save the settings or press Cancel to exit the Network Configuration
Configuration page for text user interface
Press Cfg on the Auto Provisioning page to access the Configuration page.
For manual configuration steps, see
Avaya 1200 Series IP Deskphones
If you configure parameters for automatic provisioning in the Auto Provision page, the
parameter appears dimmed in the Configuration page.
IP Deskphones Fundamentals
• Press the AllAut content-sensitive soft key on the Auto Provisioning page to
automatically configure all parameters.
OR
• Use the dial pad to enter the number associated with the parameter, or use
the navigation keys to scroll and highlight the specific parameter. Then press
Auto to configure specific parameters that had been previously configured
automatically.
without saving changes.
• Press the AllMan content-sensitive soft key on the Auto Provisioning page to
manually configure all parameters.
OR
• Use the dial pad to enter the number associated with the parameter, or use
the navigation keys to scroll and highlight the specific parameter. Then press
Man to configure specific parameters that had been previously configured
automatically.
without saving changes.
Manual provisioning of Avaya 1110 IP Deskphone and
on page 493.
Automatic provisioning
February 2013 453