Device Upgrade Process; User Profile Backup On Personal Profile Manager (Ppm); User Profile Parameters For Backup - Avaya J129 Installing And Administering

Maintenance

Device upgrade process

1. During boot-up, the phone receives the file server address from DHCP, LLDP, or the device
interface.
2. The phone contacts the provisioning server to download the firmware upgrade file,
J100Supgrade.txt.
3. In J100Supgrade.txt, the APPNAME parameter contains the firmware version.
4. The phone compares the currently installed software version with the version specified in the
APPNAME parameter.
5. If the firmware version specified in the APPNAME parameter is higher, the phone downloads
the software files for upgrade.
6. The phone automatically restarts to apply the upgraded firmware.
Tip:
The upgrade events are logged under NOTICES level in the Syslog file.

User profile backup on Personal Profile Manager (PPM)

Phone supports data backup by saving all non-volatile user parameters on PPM . When the user
logs in to any registered device, PPM restores all user data on the device.
Note:
PPM is only available in an Avaya Aura

User profile parameters for backup

The following table lists the parameters that are backed up on Personal Profile Manager (PPM).
Parameter
CLICKS
OUTSIDE_CALL_RING_TYPE 1
CALL_PICKUP_INDICATION
September 2017
®
environment.
Default Description
value
1 Specifies if the phone button can generate click sounds.
Specifies the default outside call ring type.
3 Specifies the following call pickup indication types:
• Audio
• Visual
• None
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Table continues...
70