Figure 33: Srx5K-Mpc3-100G10G - Juniper SRX5400 Hardware Manual

SRX5400 Services Gateway Hardware Guide
Description
Software release
Cables and connectors
Power requirements
Weight
58

Figure 33: SRX5K-MPC3-100G10G

NOTE: In SRX5800 Services Gateways, you cannot install the interface card
in slots 0 and 11.
If a slot in the SRX5400, SRX5600, or SRX5800 Services Gateway card cage is not
occupied by a card, you must install a blank panel to shield the empty slot and to allow
cooling air to circulate properly through the services gateway.
Fixed-configuration MPC with two 100-Gigabit Ethernet ports and four 10-Gigabit Ethernet
ports
Maximum throughput: 240 Gbps
Maximum configurable MTU: 9192 bytes
Junos OS Release 15.1X49-D10 and later
Fiber-optic 10-Gigabit DAC transceivers:
SRX-SFP-10GE-DAC-1M
SRX-SFP-10GE-DAC-3M
EX-SFP-10GE-DAC-5M
EX-SFP-10GE-DAC-7M
1000BASE CFP2 transceivers:
CFP2-100GBASE-SR10
CFP2-100GBASE-LR4
Fiber-optic 10-Gigabit SFP+ transceivers:
SRX-SFP-10GE-SR
SFPP-10GE-ER-XT
SFPP-10GE-ER
SRX-SFPP-10G-SR-ET
SRX-SFPP-10G-LR
SRX-SFP-10GE-LR
Typical: 10.52 A @ 48 V (505 W)
At different temperatures:
55° C: 607 W
40° C: 541 W
25° C: 511 W
21 lb (9.52 kg)
Copyright © 2017, Juniper Networks, Inc.