Srx5400 Services Gateway Grounding-Cable Specification; Table 37: Grounding Cable Specifications - Juniper SRX5400 Hardware Manual

Related
Documentation

SRX5400 Services Gateway Grounding-Cable Specification

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
NOTE: The same cable lug is used for the DC power cables.
SRX5400 Services Gateway Chassis Grounding Point Specifications on page 107
SRX5400 Services Gateway Grounding-Cable Specification on page 109
The grounding cable that you provide must meet the specifications in

Table 37: Grounding Cable Specifications

Cable Type
Grounding
WARNING: To meet safety and electromagnetic interference (EMI)
requirements and to ensure proper operation, you must properly ground the
services gateway chassis before connecting power. See
SRX5400 Services Gateway" on page 180
SRX5400 Services Gateway Chassis Grounding Point Specifications on page 107
SRX5400 Services Gateway Grounding-Cable Lug Specification on page 108
Quantity and Specification
2
One 6-AWG (13.3 mm ), minimum 60°C wire, or as required by
the local code
for instructions.
Chapter 10: Grounding Specifications
Table 37 on page
"Grounding the
109.
109