Figure 44: Scb Serial Number Label - Juniper SRX5400 Hardware Manual

Controls
Supported Slots
Power Requirement
Weight
LEDs
Serial Number Location
Copyright © 2017, Juniper Networks, Inc.
None
SRX5400–Only bottom slot
SRX5600–Only bottom slots
SRX5800–Only center slots
150 W
Approximately 10 lb (4.5 kg)
OK/FAIL LED, one bicolor:
Green–The SCB is operating normally.
Red–The SCB has failed and is not operating normally.
Off–The SCB is powered down.
LED:
FABRIC ONLY
Green–The SCB is operating in fabric-only mode.
Off–The SCB is operating in fabric/control board mode.
LED:
FABRIC ACTIVE
Green–The fabric is in active mode.
The serial number label is located as shown in

Figure 44: SCB Serial Number Label

Serial number
ID label
Chapter 4: Line Card and Module Description
0
and
0 1
0 , 1 , and 2/6
Figure 44 on page 69.
69