Mic With 2X40Ge Qsfp+ Interfaces (Srx-Mic-2X40G-Qsfp); Figure 29: Srx-Mic-2X40G Qsfp - Juniper SRX5400 Hardware Manual

Related
Documentation

MIC with 2x40GE QSFP+ Interfaces (SRX-MIC-2X40G-QSFP)

Description
Software release
Cables and connectors
Supported slots
Weight
LEDs
Copyright © 2017, Juniper Networks, Inc.
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 29
Modular Port Concentrator (SRX5K-MPC) Specifications on page 44
You use MICs and MPCs to add different combinations of Ethernet interfaces to your
services gateway to suit the specific needs of your network. The
SRX-MIC-2X40G-QSFP (see
two 40-Gigabit quad small form-factor pluggable (QSFP+) Ethernet ports.

Figure 29: SRX-MIC-2X40G QSFP

MIC with two QSFP+ Ethernet ports
Fits into MPC
Supports up to 80 Gbps of full-duplex traffic
Maximum configurable MTU: 9192 bytes
Maximum throughput: 80 Gbps
Junos OS Release 12.1X46-D10
Sockets for two QSFP+ 40-Gigabit Ethernet fiber-optic transceivers.
Supported QSFP+ transceiver:
40GBASE-SR4 (model number SRX-QSFP-40G-SR4)
40GBASE-LR4 (model number SRX-QSFP-40G-LR4)
Either slot in SRX5K-MPC
Approximately 1.6 lb (0.7 kg)
OK/FAIL LED, one bicolor:
Green–The MIC is operating normally.
Red–The MIC has failed and is not operating normally.
Off–The MIC is powered down.
LED, single color, one per QSFP+ port:
LINK
Green–The link is active.
Off–No link.
Chapter 4: Line Card and Module Description
Figure 29 on page 53) can be installed in an MPC to add
53