Srx5K-Mpc3-100G10G Specifications; Figure 32: Srx5K-Mpc3-40G10G Serial Number Label - Juniper SRX5400 Hardware Manual

Serial Number Location
Related
Documentation

SRX5K-MPC3-100G10G Specifications

Copyright © 2017, Juniper Networks, Inc.
The serial number label is located as shown in

Figure 32: SRX5K-MPC3-40G10G Serial Number Label

SRX5K-MPC3-100G10G Specifications on page 57
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 29
The SRX5K-MPC3-100G10G (IOC3) is an interface card that provides 100 Gigabit Ethernet
and 10 Gigabit Ethernet interfaces, with a Packet Forwarding Engine that provides a 240
Gbps line rate. This interface card is supported on SRX5400, SRX5600, and SRX5800
Services Gateways. See Figure 33 on page
NOTE: These cards do not support plug-in Modular Interface Cards (MICs).
All ports on the interface card have dual-color LEDs for reporting link status.
The interface card also supports hot-pluggable optical modules.
You can install the interface card in any of the slots that are not reserved for Switch
Control Boards (SCBs).
Chapter 4: Line Card and Module Description
Figure 32 on page 57.
58.
57