Figure 37: Flex Ioc Port Module Srx-Ioc-16Ge-Sfp - Juniper SRX5400 Hardware Manual

Hide thumbs Also See for SRX5400:
Table of Contents

Advertisement

Description
Software release
Cables and connectors
Controls
Supported Slots
Weight
LEDs
Copyright © 2017, Juniper Networks, Inc.

Figure 37: Flex IOC Port Module SRX-IOC-16GE-SFP

Port module with 16 Gigabit Ethernet SFP ports
Maximum throughput: 10 Gbps
Oversubscription ratio: 1.6:1
Maximum configurable MTU: 9192 bytes
Junos OS Release 9.5R1 and later
16 Gigabit Ethernet SFP ports
Supported SFP transceivers:
1000BASE-LH (model numbers SRX-SFP-1GE-LH, SRX-SFP-1GE-LH-ET)
1000BASE-LX (model numbers SRX-SFP-1GE-LX, SRX-SFP-1GE-LX-ET)
1000BASE-SX (model numbers SRX-SFP-1GE-SX, SRX-SFP-1GE-SX-ET)
1000BASE-T (model numbers SRX-SFP-1GE-T, SRX-SFP-1GE-T-ET)
Button–The
ONLINE
ONLINE
online and offline
Either slot in SRX5K-FPC-IOC Flex IOC
Approximately 1.6 lb (0.7 kg)
LED, one bicolor:
OK/FAIL
Steady green–The port module is operating normally.
Red–The port module has failed and is not operating normally.
Off–The port module is powered down.
LED, single color, one per port:
LINK
Steady green–The link is active.
Off–No link.
LED, single color, one per port:
TX/RX
Blinking Green–The port is receiving or transmitting data.
Off–No activity.
Chapter 4: Line Card and Module Description
button on the port module front panel toggles the port module
63

Advertisement

Table of Contents
loading

Table of Contents