Figure 3: Srx5K-Scb - Juniper SRX5400 Hardware Manual

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Monitors and controls system functions, including fan speed, board power status, PDM
status and control, and the system front panel
Provides interconnections to all the MPCs within the chassis through the switch fabrics
integrated into the SCB
When the SCB is part of a host subsystem, the Routing Engine installs directly into a slot
on the SCB (see Figure 3 on page

Figure 3: SRX5K-SCB

You must install one SCB in the services gateway as part of a host subsystem.
The SCB installs horizontally into the slot at the bottom of the card cage labeled
any slots are empty, you must install a blank panel.
For detailed information about SCBs supported by the services gateway, see the
SRX5600, and SRX5800 Services Gateway Card Reference
SRX5400 Services Gateway Card Cage and Slots on page 5
Maintaining the SRX5400 Services Gateway Host Subsystem on page 213
Replacing the SRX5400 Services Gateway SCB on page 272
Chapter 2: Hardware Component Overview
9).
at
www.juniper.net/techpubs/
. If
0
SRX5400,
.
9