Srx5400 Services Gateway Ac Power Supply; Srx5400 Services Gateway Ac Power Supply Leds; Figure 53: Ac Power Supply - Juniper SRX5400 Hardware Manual

SRX5400 Services Gateway AC Power Supply

Related
Documentation

SRX5400 Services Gateway AC Power Supply LEDs

Copyright © 2017, Juniper Networks, Inc.
Troubleshooting the SRX5400 Services Gateway Power System on page 234
Each AC power supply consists of one AC appliance inlet, an AC switch, a fan, and LEDs
to monitor the status of the power supply.
Each inlet requires a dedicated AC power feed and a dedicated 16 A @ 100 VAC or 16 A
@ 200 VAC circuit breaker, or as required by local code.

Figure 53: AC Power Supply

WARNING: The services gateway is pluggable type A equipment installed in
a restricted-access location. It has a separate protective earthing terminal
(sized for UNC 1/4-20 ground lugs) provided on the chassis in addition to the
grounding pin of the power supply cord. This separate protective earthing
terminal must be permanently connected to earth.
NOTE: The SRX5400 Services Gateway and SRX5600 Services Gateway
use the same power supply model.
SRX5400 Services Gateway Power System Overview on page 81
SRX5400 Services Gateway AC Power Supply LEDs on page 83
Troubleshooting the SRX5400 Services Gateway Power System on page 234
Replacing an SRX5400 Services Gateway AC Power Supply on page 299
SRX5400 Services Gateway AC Power Supply Specifications on page 111
Each AC power supply faceplate contains three LEDs that indicate the status of the
power supply (see Table 21 on page
Chapter 6: Power System Description
Figure 53 on page 83
84). The power supply status is also reflected in two
shows the power supply.
83