CHAPTER 3
Chassis Description
SRX5400 Services Gateway Chassis
Copyright © 2017, Juniper Networks, Inc.
SRX5400 Services Gateway Chassis on page 15
SRX5400 Services Gateway Midplane Description on page 17
SRX5400 Services Gateway Craft Interface Alarm LEDs and Alarm Cutoff/Lamp Test
SRX5400 Services Gateway Craft Interface Alarm Relay Contacts on page 23
The services gateway chassis is a rigid sheet metal structure that houses all the other
components (see
Figure 8 on page
The chassis measures 8.71 in. (22.1 cm) high, 17.45 in. (44.3 cm) wide, and 24.5 in. (62.2 cm)
deep (from the front to the rear of the chassis). The chassis installs in standard 800-mm
(or larger) enclosed cabinets, 19-in. equipment racks, or telco open-frame racks. Up to
five services gateways can be installed in one standard (48 U) rack if the rack can handle
their combined weight, which can be greater than 1100 lb (500 kg). See
Services Gateway Physical Specifications" on page 90
SRX5400 Services Gateway.
CAUTION:
Before removing or installing components of a services gateway,
attach an ESD strap to an ESD point and place the other end of the strap
around your bare wrist. Failure to use an ESD strap can result in damage to
the services gateway.
WARNING:
The services gateway must be connected to earth ground during
normal operation.
16,
Figure 9 on page
16, and
for physical specifications for the
Figure 10 on page
16).
"SRX5400
15