Srx5400 Services Gateway Craft Interface Fan Leds; Srx5400 Services Gateway Craft Interface Online/Offline Buttons; Table 8: Card Ok/Fail Leds; Table 9: Fan Leds - Juniper SRX5400 Hardware Manual

Related
Documentation

SRX5400 Services Gateway Craft Interface Fan LEDs

Related
Documentation

SRX5400 Services Gateway Craft Interface Online/Offline Buttons

Copyright © 2017, Juniper Networks, Inc.

Table 8: Card OK/Fail LEDs

Label Color
Green
OK
Red
FAIL
SRX5400 Services Gateway Craft Interface Overview on page 17
SRX5400 Services Gateway Craft Interface Power Supply LEDs on page 20
SRX5400 Services Gateway Craft Interface Fan LEDs on page 21
The fan tray LED are located near the middle of the craft interface.
describes the functions of the fan tray LEDs.

Table 9: Fan LEDs

Label Color
Green
OK
Red
FAIL
SRX5400 Services Gateway Craft Interface Overview on page 17
SRX5400 Services Gateway Craft Interface Card OK/Fail LEDs on page 20
SRX5400 Services Gateway Craft Interface Online/Offline Buttons on page 21
The craft interface has a row of Online/Offline buttons along its lower edge. Each button
corresponds to one slot in the card cage. The Online/Offline buttons are only supported
for slots containing MPC interface cards. You can install MPCs into slots
NOTE: The Online/Offline buttons are not supported for removal and
replacement of SPCs or SCB.
State Description
On steadily The card is functioning normally.
Blinking The card is transitioning online or offline.
Off The card is not online.
On steadily The card has failed.
State
On steadily
On steadily
Chapter 3: Chassis Description
Table 9 on page 21
Description
Fan tray is functioning normally.
Fan tray has failed.
, , and
0/1 1 2
only.
21