Switch Control Board Srx5K-Scb3 Specifications - Juniper SRX5400 Hardware Manual

SRX5400 Services Gateway Hardware Guide
Related
Documentation

Switch Control Board SRX5K-SCB3 Specifications

Description
Software release
Cables and connectors
Controls
Supported slots
Power requirement
Weight
72
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 29
Routing Engine SRX5K-RE-1800X4 Specifications on page 76
Each SRX5K-SCB3 (SCB3) consists of the following components:
I2C bus logic for low-level communication with each component
Component redundancy circuitry
Control Board/Routing Engine mastership mechanism
Gigabit Ethernet switch that is connected to the embedded CPU complex on all
components
Switch fabric to provide the switching functions for the MPCs
Control field-programmable gate array (FPGA) to provide the Peripheral Component
Interconnect (PCI) interface to the Routing Engine
Circuits for chassis management and control
Power circuits for the Routing Engine and SCB3
LEDs to provides status of the SCB3
SCB3 with slot for Routing Engine
Junos OS Release 15.1X49-D10 and later
Slot for Routing Engine
None
SRX5400–Only bottom slot 0
SRX5600–Only bottom slots 0 and 1
SRX5800–Only center slots 0, 1, and 2/6
300 W
9.6 lb (4.4 kg) with Routing Engine
Copyright © 2017, Juniper Networks, Inc.