Snmp Traps - Paradyne GranDSLAM 4200 User Manual

C. Traps and MIBs

SNMP Traps

Table C-1, SNMP
Table C-1. SNMP Traps (1 of 3)
Trap Event (Trap #)
Standard Traps
authenticationFailure (5)
linkDown(3)
linkUp(4)
DSX Traps
dsx1LineStatusChange (1)
M4 Traps
atmM4IfLcdAlarm(2)
atmM4IfLosAlarm(5)
Enterprise-Specific Traps
devConfigRestoreFailEvent(3)
devAutoBackupFail Event(2)
pdnAtmIfConfExtLineRateAlarm
Clear(102)
pdnAtmIfConfExtLineRateAlarm
Set(2)
C-2
Traps, lists the traps supported by the GranDSLAM 4200.
Description
The authenticationFailure trap signifies that the
unit, acting in an agent role, has received a
protocol message that has not been properly
authenticated. The snmpEnableAuthenTraps
object indicates whether this trap will be
generated.
The unit has recognized a failure in one of the
communication interfaces.
The unit has recognized that one of the
communication interfaces has come up.
Value of an instance dsx1LineStatus changes.
LCD (Loss of Cell Delineation) has occurred.
LOS (Loss of Signal) has occurred.
Automated backup of a device's configuration
at the scheduled time is prevented.
Sent by a unit to indicate that the download of
an incorrect or incompatible configuration file to
the unit was attempted.
The configuration has changed so that the
previously invalid CAC contracts can be
guaranteed in the egress direction.
The configuration has changed so that the
previously valid CAC contracts can no longer
be guaranteed in the egress direction.
August 2002
Variable Binding
ifIndex (RFC 2863)
ifAdminStatus (RFC 2863)
ifOperStatus (RFC 2863)
ifIndex (RFC 2863)
ifAdminStatus (RFC 2863)
ifOperStatus (RFC 2863)
ifIndex (RFC 2863)
ifAdminStatus (RFC 2863)
ifOperStatus (RFC 2863)
ifIndex (RFC 2863)
dsx1LineStatus
dsx1LineStatusLastChange
ifIndex (RFC 2863)
ifOperStatus (RFC 2863)
atmfM4TrapAlarmSeverity
ifIndex (RFC 2863)
ifOperStatus (RFC 2863)
atmfM4TrapAlarmSeverity
entPhysicalIndex
entPhysicalIndex
ifIndex (of ATM link)
ifIndex (of ATM link)
4200-A2-GB20-00