Example; Related Commands - Paradyne GranDSLAM 4200 User Manual

5. ATM Commands
Table 5-16. RTRV-PROFILE-TRAFDSC Response Parameters

Example

Retrieve parameters for profile 6.
RTRV-PROFILE-TRAFDSC:TAMPA:6:42::;
M
;

Related Commands

DLT-PROFILE-TRAFDSC
ENT-PROFILE-TRAFDSC
5-20
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
trafdsc As described for command parameters (see
RTRV-PROFILE-TRAFSDSC Command
used.
profile_scope As described for command parameters (see
RTRV-PROFILE-TRAFSDSC Command
profile_name A string of characters (32 maximum) that uniquely identifies the profile
within its scope.
trafdscr_type Traffic descriptor type. The valid value is UBR (best effort).
trafdsc_nblk ATM traffic descriptor profile parameter block, containing the following
parameter:
DISCARD: Packet discard. Valid values are:
– Yes: Partial packet discard is enabled.
– No: Partial Packet discard is disabled.
errcde Error code (see
TAMPA 01-11-24 12:30:43
42 COMPLD
/* RTRV-PROFILE-TRAFDSC:TAMPA:6:42:: */
6:TAMPA101,LOCAL,UBR,DISCARD=YES
August 2002
Appendix A, Error Codes
on page 5-2
on page 5-8
Table 5-15,
Parameters), except ALL is not
Table 5-15,
Parameters).
).
4200-A2-GB20-00