Response Format - Paradyne GranDSLAM 4200 User Manual

10. Fault Commands

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response will be sent:
After the above response, a new command input may be generated.
Normal Response:
M
,,[srveff] */
[dirn],:[cond_descr]"
;
Error Response:
M
[srveff] */
;
Table 10-4.
10-6
IP c
sid yy-mm-dd hh:mm:ss
c COMPLD
/* RTRV-ALM-ALL:[tid]:aid_all:[ctag]::[ntfncde]
"aid_adsl,[aid_type]:ntfncde,cond_adsl,serveff,,,[locn],
sid yy-mm-dd hh:mm:ss
c DENY
/* RTRV-ALM-ALL:[tid]:aid_all:[ctag]::[ntfncde],,
errcde
RTRV-ALM-ALL Response Parameters (1 of 2)
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see
aid Access identifier associated with the alarm. Valid values are:
SHELF-rack-shelf
LTA-rack-shelf-slot
ADSL-rack-shelf-slot-circuit
NTT1-circuit
[aid_type] The type of Access Identifier.
August 2002
Appendix A, Error Codes )
4200-A2-GB20-00