Rtrv-Mem - Paradyne GranDSLAM 4200 User Manual

RTRV-MEM

The RTRV-MEM command retrieves a list of software image files available in the
NE, along with the software version associated with each file.
Table 14-16. RTRV-MEM Command Parameters
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
After the above response, a new command input may be generated.
Normal Response:
M
;
Error Response:
M
;
4200-A2-GB20-00
RTRV-MEM:[tid]:aid_com:[ctag];
RESTRICTION: All parameters in this command are position-defined.
[tid] Identification of the target NE. The default value is null. The NE SID
code is the only other valid value.
aid_com Access Identifier for all common equipment. The value can be preceded
with AID=, but this is not required. The value is COM.
[ctag] Correlation tag (6 characters maximum) that links an input command
with associated output responses. The default is 0.
IP c
sid yy-mm-dd hh:mm:ss
c COMPLD
/* RTRV-MEM:[tid]:aid_com:[ctag] */
filename[,filename,...]
sid yy-mm-dd hh:mm:ss
c DENY
/* RTRV-MEM:[tid]:aid_com:[ctag] */
aid:ERRCDE=errcde
/* error description */
August 2002
14. System Commands
14-17