Mib Ii (Rfc 2863) Extension To The Interface Table; Mib Ii (Rfc 2863) Interface Stack Group - Paradyne GranDSLAM 4200 User Manual

Atm stackable dslam
Hide thumbs Also See for GranDSLAM 4200:
Table of Contents

Advertisement

C. Traps and MIBs
Table C-4. ifIndex Assignments
Interface
ifType (IANAifType) IfIndex
T1
ds1(18)
E1
e1(19)
ATM Link
atm(37)
AAL5
aal5(49)
ReachDSL port
adsl(94)
T
DSL channels
fast(94)
T
interleave(126)
ATM
atm(37)

MIB II (RFC 2863) Extension to the Interface Table

This extension contains additional objects for the Interface table. Only the following
objects are supported:
T
T

MIB II (RFC 2863) Interface Stack Group

For GranDSLAM 4200, the interface stack group is used to show the relationship
between multiple logical and physical interfaces. The ifStackTable entries for
GranDSLAM 4200 are shown in
Entries.
Table C-5. GranDSLAM 4200 IfStackTable Entries
GranDSLAM 4200
Higher Interface Number
atm1
atm24
AAL5
0
T
T
C-12
00cc00190 x ( x =1 8)
00cc00190 x ( x =1 8)
00cc00390 x
00cc004901
00cc001 yyy (yyy=1
T
fast channels: 00cc002 yyy
(yyy=1 48)
T
interleave channels:
00cc002 yyy (yyy=49 96
00cc003 yyy (yyy=1 96)
ifLinkUpDownTrapEnable(14)
the unit for changes to this object to take effect.
ifConnectorPresent(17)
GranDSLAM 4200
Mid-Interface Number (Fast Channel)
adsl1:2
adsl24:2
ifStackHigherLayer Object (ifStackEntry1) – Provides the ifIndex
corresponding to the higher sublayer running on top of the interface specified
in the ifStackLowerLayer object. The higher interface number ranges from
dsl1 dsl24, cel1, and wan1. The lower interface number is 0.
ifStackLowerLayer Object (ifStackEntry2) – Provides the ifIndex corresponding
to the lower sublayer running below the interface specified in the
ifStackHigherLayer object. The higher interface number is 0. The lower
interface number ranges from atm1 atm24.
August 2002
ifDescr
"T1 interface in unit 'cc'"
"E1 interface in unit 'cc'"
"ATM Link in unit 'cc'"
"ATM-AAL5 interface in unit 'cc'"
8)
"ReachDSL port 'yy' in unit 'cc'"
"ReachDSL port 'yy' in unit 'cc'"
"ATM Port interface 'yy' in unit 'cc'"
Read/Write. SNMP traps must be enabled on
Read only.
Table C-5, GranDSLAM 4200 IfStackTable
GranDSLAM 4200
Lower Interface Number
adsl1
cel1
wan1
adsl24
4200-A2-GB20-00

Advertisement

Table of Contents
loading

Table of Contents