Canc-User - Paradyne GranDSLAM 4200 User Manual

14. System Commands

CANC-USER

The CANC-USER command logs off a user's own session.
Table 14-5.
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response will be sent:
After the above response, a new command input may be generated.
Normal Response:
M
;
Error Response:
M
;
14-6
CANC-USER Command Parameters
CANC-USER:[tid]:[uid]:[ctag];
RESTRICTIONS: All parameters in this command are position-defined.
[tid] The identification of the target NE. TID is optional and has a factory
default value of null. The NE's SID code is the only other valid value.
[uid] The user identification name (10 characters maximum). Input is
case-sensitive.
[ctag] The correlation tag (6 characters maximum) that links an input
command with associated output responses. It is optional with a default
of 0.
IP c
sid yy-mm-dd hh:mm:ss
c COMPLD
/* CANC-USER:[tid]:[uid]:[ctag] */
sid yy-mm-dd hh:mm:ss
c DENY
/* CANC-USER:[tid]:[uid]:[ctag] */
errcde
August 2002 4200-A2-GB20-00