Table of Contents
Advertisement
3. ADSL Facility Commands
Table 3-26. RTRV-ADSL Response Parameters (2 of 2)
Example
Retrieve ADSL configuration for data rack 1, shelf 1, slot 1, circuit 9.
RTRV-ADSL:TAMPA:ADSL-1-1-1-9:42::::;
M
;
Related Commands
DLT-PROFILE-ADSL
ED-ADSL
ED-PROFILE-ADSLDN
ED-PROFILE-ADSLUP
ENT-PROFILE-ADSL
RTRV-PROFILE-ADSL
RTRV-PROFILE-ADSLDN
RTRV-PROFILE-ADSLUP
3-34
Parameter
Explanation
adsl_nblk
MXTXPWRDN: Specifies the maximum transmission power settings for
the ATU-C. The maximum transmit power range may be limited
(continued)
according to local guidelines when spectrum management is enabled.
The values (configurable in 1 dB increments) supported are: +12 to
14 dB (default is +12 dB)
MXTXPWRUP: Specifies the maximum transmission power settings for
the ATU-R. The maximum transmit power range may be limited
according to local guidelines when spectrum management is enabled.
The values (configurable in 1 dB increments) supported are +12 to
14 dB (default is +12 dB)
state
State from the Bellcore state model. Values are:
IS-NR: In service, normal
OOS-AU: Out of service, autonomous
OOS-MA: Out of service, management (transitory state, changes to
OOS-AUMA)
OOS-AUMA: Out of service, management and autonomous
[sst]
As described for command parameters (see
Command
errcde
Error code (see
TAMPA 02-03-24 12:30:43
42 COMPLD
/* RTRV-ADSL:TAMPA:ADSL-1-1-1-9:42::::
"ADSL-1-1-1-9:ADSLPROF=4,QOSCLASSF=UBR,:IS"
on page 3-6
on page 3-10
on page 3-14
on page 3-19
on page 3-24
on page 3-40
August 2002
Parameters).
Appendix A, Error Codes
on page 3-44
on page 3-50
Table 3-25, RTRV-ADSL
)
*/
4200-A2-GB20-00
Advertisement
Chapters
Table of Contents
