Response Format - Paradyne GranDSLAM 4200 User Manual

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response will be sent:
After the above response, a new command input may be generated.
Normal Response:
M
[srveff],[locn],[dirn] */
locn,dirn:cond_descr"
;
Error Response:
M
[locn],[dirn] */
;
Table 10-8.
4200-A2-GB20-00
IP c
sid yy-mm-dd hh:mm:ss
c COMPLD
/* RTRV-ALM-T1:[tid]:aid_ds1:[ctag]::[ntfncde],,
"aid_ds1,[aid_type]:ntfncde,cond_ds1,serveff,,,
sid yy-mm-dd hh:mm:ss
c DENY
/* RTRV-ALM-T1:[tid]:aid_ds1:[ctag]::[ntfncde],,[srveff],
errcde
/* error description */
RTRV-ALM-T1 Response Parameters (1 of 2)
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see
aid_ds1 As described for command parameters (see
Command
aid_type The type of Access Identifier. The value is T1.
ntfncde As described for command parameters, except that ALL is not used.
August 2002
Appendix A, Error Codes
Parameters), except that ALL is not used.
10. Fault Commands
)
Table 10-7, RTRV-ALM-T1
10-13