Rtrv-Profile-Trafdsc; Response Format - Paradyne GranDSLAM 4200 User Manual

RTRV-PROFILE-TRAFDSC

The RTRV-PROFILE-TRAFDSC command retrieves configuration parameters of
an ATM traffic descriptor file.
Table 5-15. RTRV-PROFILE-TRAFSDSC Command Parameters

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
After the above response, a new command input may be generated.
Normal Response:
M
RTRV-PROFILE-TRAFDSC:[tid]:trafdsc:[ctag]::,[profile_scope]
*/
trafdsc:profile_name:profile_scope:trafdscr_type:trafdscr_
nblk
;
Error Response:
M
RTRV-PROFILE-TRAFDSC:[tid]:trafdsc:[ctag]::,[profile_scope]
*/
;
4200-A2-GB20-00
RTRV-PROFILE-TRAFDSC:[tid]:trafdsc_profile_id:[ctag]::,[pro
file_scope];
RESTRICTIONS: All parameters in this command are position-defined.
[tid] Identification of the target NE. The default value is null. The NE SID
code is the only other valid value.
trafdsc_profile_id Numeric Identifier for a traffic descriptor profile (1 250). Grouping and
ranging are allowed and ALL may be used.
[ctag] Correlation tag (6 characters maximum) that links an input command
with associated output responses. The default is 0.
[profile_scope] Scope of the profile. The valid value is LOCAL (local to this unit only).
If no value is specified, this parameter is ignored (all values are
specified).
IP c
sid yy-mm-dd hh:mm:ss
c COMPLD
/*
sid yy-mm-dd hh:mm:ss
c DENY
/*
errcde
August 2002
5. ATM Commands
5-19