Example; Related Command; Related Commands - Paradyne GranDSLAM 4200 User Manual

Table 3-32. RTRV-PROFILE-ADSL Response Parameters

Example

Retrieve profile 5.
RTRV-PROFILE-ADSL:TAMPA:5:42;
M
;

Related Commands

ACT-PROFILE-ADSL
DLT-PROFILE-ADSL
ENT-PROFILE-ADSL
4200-A2-GB20-00
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
adsl_profile_id As described for command parameters, except that ALL is not used
profile_name Name (32 characters maximum) that uniquely identifies the profile
within its scope
profile_scope As described for command parameters
latency Latency of the ADSL line. Only single latency is supported upstream
and downstream. The valid value is FAST (only ADSL FAST supported).
profile_state State of the profile (ADSL profiles only). Values are:
CONFIG: Profile is currently being created. It can be configured, but not
used.
ACTIVE: Profile has been activated and is ready for use and is
configured.
errcde Error code (see
TAMPA 02-07-24 12:30:43
42 COMPLD
/* RTRV-PROFILE-ADSL:TAMPA:5:42 */
5:LOCAL:TAMPA101:CONFIG
on page 3-2
on page 3-6
on page 3-24
August 2002
Appendix A, Error Codes )
3. ADSL Facility Commands
3-41