Response Format - Paradyne GranDSLAM 4200 User Manual

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
After the above response, a new command input may be generated.
Normal Response:
M
;
Error Response:
M
;
Table 6-8.
4200-A2-GB20-00
IP c
sid yy-mm-dd hh:mm:ss
c COMPLD
/* RTRV-CRS-VC:[tid]:aid_vcl:[ctag]::::[pstf] */
nt_vci,lt_vci:::state
sid yy-mm-dd hh:mm:ss
c DENY
/* RTRV-CRS-VC:[tid]:aid_vci:[ctag]::::[pstf] */
errcde
RTRV-CRS-VC Response Parameters (1 of 2)
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see
nt_vci Virtual Channel Identifier for the Virtual Channel Link on the NT
(network) side. Values are:
NTVCL-vpi-vci
– vpi: Virtual Path Identifier
– vci: Virtual Channel Identifier for the Virtual Channel Link
August 2002
6. Cross Connect Commands
Appendix A, Error Codes )
6-11