1. About Hotwire 8775 and 8785 Termination Units
SNMP Management Capabilities
The termination unit supports SNMP Version 1, and can be managed by any
industry-standard SNMP manager and accessed using SNMP by external SNMP
managers.
Management Information Base (MIB) Support
For a detailed description of supported MIBs, visit Paradyne's Web site at
www.paradyne.com. The following MIBs are supported:
T
T
T
SNMP Trap Support
The unit supports traps as defined in RFC 1215. They may include
variable-bindings specified in the following MIBs:
T
T
V.35
Router
1-4
MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with a
network management protocol in TCP/IP internets and provides general
information about the unit. MIB II is backward-compatible with MIB I.
RS-232-Like MIB (RFC 1659) – Defines objects for managing RS-232-type
interfaces (e.g., V.35, RS-422, RS-423, etc.) and supports the synchronous
data port on the DSU.
Enterprise MIB – Supports configuration, status, statistics, and tests.
MIB II (RFC 1573) – Defines the general objects for use with a network
management protocol in TCP/IP internets and provides general information
about the termination unit. MIB II is backward-compatible with MIB I.
Enterprise MIB – Supports configuration, status, statistics, and tests.
TDM SDSL
AC
T5A
250V
48V
RTN
A B
A
B
EOC
AC
INPUT
48VDC CLASS 2 OR
LIMITED PWR SOURCE
79x5
8600 Series
DSLAM
February 2001
Operation, Maintenance
and Provisioning Center
Network
87x5
SNMP NMS
3
2
1
DC FUSES
DC PWR
T4A, MIN. 48V
FAN
4
5
6
.
3
.
2
.
1
.
ALM
A
B
A
B
STACK
IN
OUT
SERIAL
MCC
1
2
3
POSITION
Ethernet
Interface
Ethernet
LAN
Data
Voice
01-16521-01
8700-A2-GB25-10