Table of Contents
Advertisement
12. Security Commands
ENT-USER-SECU
The ENT-USER-SECU command defines the security levels and other
security-related parameters for a specified user. One default user will be
supported (UID=SUPERUSER, PID=ASN#1500, UAP=SUPER).
Table 12-9.
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
After the above response, a new command input may be generated.
Normal Response:
M
;
12-10
ENT-USER-SECU Command Parameters
ENT-USER-SECU:[tid]:uid:[ctag]::pid,,[uap][:];
RESTRICTIONS: All parameters in this command are position-defined.
[tid]
Identification of the target NE. The default value is null. The NE SID
code is the only other valid value.
uid
User Identification name (10 characters maximum). Input is
case-sensitive.
[ctag]
Correlation tag (6 characters maximum) that links an input command
with associated output responses. The default is 0.
pid
Password (8 10 characters). The value must include at least one digit,
one letter, and one non-alphanumeric character. Input is case-sensitive.
[uap]
User Access Privilege. Valid values are:
NULL: User has no access rights.
RTRV: Retrieve. Report and retrieve commands only (no configuring).
PROV: Configuring (provisioning). Report, retrieve, and configuration
commands allowed. No system administrator tasks including
management of the NE.
SUPER: Supervisor. All user functions allowed.
uid_nblk
Named parameter block for UID.
IP c
sid yy-mm-dd hh:mm:ss
c COMPLD
/* ENT-USER-SECU:[tid]:uid:[ctag]::pid,,[uap][:]*/
August 2002
4200-A2-GB20-00
Advertisement
Chapters
Table of Contents
