Example; Related Command - Paradyne GranDSLAM 4200 User Manual

Table 3-42. RTRV-PROFILE-ADSLUPALM Response Parameters (2 of 2)

Example

Retrieve profile 6.
RTRV-PROFILE-ADSLUPALM:TAMPA:6:42;
M
6:LOCAL:TAMPA101:LOFS-L=0,LOSS=0,LOLS=0,ES-L=120,SES-L=15,
UAS-L=0,INCRATE-F=0,DECRATE-F=0,INIT=N
;

Related Command

ED-PROFILE-ADSLUPALM
ENT-PROFILE-ADSLALM
4200-A2-GB20-00
Parameter Explanation
[adslprof_nblk] DECRATE-F: Decreasing Rate (fast channel). SNMP rate change trap
and TL1 autonomous message are sent if the current rate is
(continued)
previous rate minus this threshold (0-2176 kbps in 32 kbps increments,
where 0 disables the messages). The default is 0.
INITFAIL: Initialization Failure. Enables or disables InitFailureTrap
messages specified in RFC 2662.
– Y: Enable Initialization Failure Trap messages only.
– N: Disable Initialization Failure Trap messages only (Default).
If not specified, the values of these parameters remain unchanged.
errcde Error code (see
TAMPA 02-07-24 12:30:43
42 COMPLD
/* RTRV-PROFILE-ADSLUPALM:TAMPA:6 */
August 2002
Appendix A, Error Codes
on page 3-21
on page 3-26
3. ADSL Facility Commands
the
)
3-55