Example; Related Commands - Paradyne GranDSLAM 4200 User Manual

10. Fault Commands
Table 10-8.

Example

Retrieve service-affecting critical alarms for NTT-1.
RTRV-ALM-T1:TAMPA:NTT-1:42::CR,,SA;
M
;

Related Commands

None
10-14
RTRV-ALM-T1 Response Parameters (2 of 2)
Parameter Explanation
cond_ds1 DS1 facility condition. Values are:
AIS: Alarm Indication Signal
LCD: Loss of ATM Cell Delineation
LOF: Loss of Framing
LOS: Loss of Signal/clock
RAI: Remote Alarm Indication
serveff As described for command parameters (see
Command
[locn] Location of the condition. Valid value is NEND (Near end).
[dirn] Direction of the condition. Valid value is RCV (Receive).
[cond_descr] Description of alarm condition.
TAMPA 02-04-20 10:30:23
42 COMPLD
/* RTRV-ALM-T1:TAMPA:NTT-1:42::CR::SA
"NTT-1,T1:CR,LOS,SA,,,NEND,RCV,:Loss of Signal/Clock"
August 2002
Parameters), except that ALL is not used.
Table 10-7, RTRV-ALM-T1
*/
4200-A2-GB20-00