Response Format - Paradyne GranDSLAM 4200 User Manual

3. ADSL Facility Commands
RTRV-PROFILE-ADSL
The RTRV-PROFILE-ADSL command retrieves information about ADSL line
configuration profiles.
Table 3-31. RTRV-PROFILE-ADSL Command Parameters

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
After the above response, a new command input may be generated.
Normal Response:
M
[::,profile_scope] */
profile_state
;
Error Response:
M
[::,profile_scope] */
;
3-40
RTRV-PROFILE-ADSL:[tid]:adsl_profile_id:[ctag][::,profile_s
cope];
RESTRICTIONS: All parameters in this command are position-defined.
[tid] Identification of the target NE.The default value is null. The NE SID
code is the only other valid value.
adsl_profile_id ADSL profile index (1 30). Grouping and ranging are allowed. ALL may
be used.
[ctag] Correlation tag (6 characters maximum) that links an input command
with associated output responses. The default is 0.
[profile_scope] Scope of the profile. The valid value is LOCAL (local to this stack only).
If no value is specified, this parameter is ignored (all values are
reported).
IP c
sid yy-mm-dd hh:mm:ss
c COMPLD
/* RTRV-PROFILE-ADSL:[tid]:adsl_profile_id:[ctag]
adsl_profile_id:profile_name,profile_scope,latency,
sid yy-mm-dd hh:mm:ss
c DENY
/* RTRV-PROFILE-ADSL:[tid]:adsl_profile_id:[ctag]
aid:ERRCDE=errcde
/* error description */
August 2002 4200-A2-GB20-00