Virtual Channel Cross Connect Group (Rfc 2515) - Paradyne GranDSLAM 4200 User Manual

Virtual Channel Cross Connect Group (RFC 2515)

This table contains configuration and state information of point-to-point,
point-to-multipoint, and multipoint-to-multipoint VC cross-connections for PVCs.
This table has read access and is used to cross-connect the VCLs together in an
ATM switch or network that belongs to a VC connection (see
Channel Cross Connect Group
Table C-8. Virtual Channel Cross Connect Group Objects
Object
atmVcCrossConnectL2HOper
Status
(atmVcCrossConnectEntry 9)
atmVcCrossConnectH2LOper
Status
(atmVcCrossConnectEntry
10)
atmVcCrossConnectL2HLast
Change
(atmVcCrossConnectEntry
11)
atmVcCrossConnectH2LLast
Change
(atmVcCrossConnectEntry
12)
atmVcCrossConnectRowStat
us (atmVcCrossConnectEntry
13)
4200-A2-GB20-00
Description
Identifies the current operational status
of the VC cross-connection in one
direction (low to high).
Identifies the current operational status
of the VC cross-connection in one
direction (high to low).
Identifies the value of the Mib II's
sysUpTime object at the time that this
VC cross-connection entered its current
operational state in a low to high
direction.
Identifies the value of the Mib II's
sysUpTime object at the time that this
VC cross-connection enterde its current
operational state in a high to low
direction.
Used to create a new cross-connection
row for the cross-connecting VCLs
created using the atmVclTable or to
change or delete an existing
cross-connection.
August 2002
Objects).
Setting/Contents
The only valid values are:
T
up(1)
T
down(2)
T
unknown(3): Not supported.
The only valid values are:
T
up(1)
T
down(2)
T
unknown(3): Not supported.
Integer. If the current state was entered
into prior to the last reinitialization of the
agent, then this object contains a zero
value.
Integer. If the current state was entered
into prior to the last reinitialization of the
agent, then this object contains a zero
value.
The only valid values are:
T
active: Cannot be set to active unless
the atmVcCrossConnectAdminStatus
object exists in the row.
T
createAndGo
T
destroy
C. Traps and MIBs
Table C-8, Virtual
C-17