About This Guide - Paradyne GranDSLAM 4200 User Manual

About This Guide

Document Purpose and Intended Audience
This guide contains information necessary for the use of the GranDSLAM 4200
ATM Stackable DSLAM.
The successful user of this manual has some experience with the installation and
configuration of DSL network devices, and Transaction Language No. (TL1)
commands.
Document Summary
4200-A2-GB20-00
Section
Chapter 1, Introduction to the
Hotwire 4200 GranDSLAM
Chapter 2, Using the
Command Line Interface
Chapter 3, ADSL Facility
Commands
Chapter 4, DS1 Facility
Commands
Chapter 5, ATM Commands
Chapter 6, Cross Connect
Commands
Chapter 8, IP Access
Commands
Chapter 7, Equipment
Commands
Chapter 9, Performance
Commands
Chapter 10, Fault Commands
August 2002
Description
Provides an introduction to the capabilities of the Hotwire
4200 GranDSLAM.
Explains how to use the Command Line Interface (CLI).
Contains commands for configuring and viewing the
ADSL facility.
Contains commands for configuring and viewing the DS1
facility.
Contains commands for configuring and viewing the ATM
interface.
Contains commands for configuring and viewing cross
connections.
Contains commands for configuring and viewing the
Internet Protocol (IP) port.
Contains commands for configuring and viewing
information concerning equipment in the network.
Contains commands for viewing network reports.
Contains commands for retrieving network fault
information.
xvii