Table of Contents
Advertisement
12. Security Commands
RTRV-CID-SECU
The RTRV-CID-SECU command retrieves the configuration data associated with
the Channel Identifiers (CID).
Table 12-11. RTRV-CID-SECU Command Parameters
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
After the above response, a new command input may be generated.
Normal Response:
M
;
Error Response:
M
;
12-12
RTRV-CID-SECU:[tid]:cid:[ctag][:];
RESTRICTIONS: All parameters in this command are position-defined.
[tid]
Identification of the target NE. The default value is null. The NE SID
code is the only other valid value.
cid
Calling address identifier. Valid values are:
CRAFT: Local console interface
REMOTE: Remote console interface
[ctag]
Correlation tag (6 characters maximum) that links an input command
with associated output responses. The default is 0.
IP c
sid yy-mm-dd hh:mm:ss
c COMPLD
/* RTRV-CID-SECU:[tid]:cid:[ctag] */
"cid:chap:cid_nblk"
sid yy-mm-dd hh:mm:ss
c
DENY
/* RTRV-CID-SECU:[tid]:cid:[ctag] */
aid:ERRCDE=errcde
/* error description */
August 2002
4200-A2-GB20-00
Advertisement
Chapters
Table of Contents
