Traps And Report Formats; Snmp Traps Overview; Trap Messages - Paradyne COMSPHERE 6700 Series User Manual

Network management system snmp proxy agent feature

Hide thumbs Also See for COMSPHERE 6700 Series:

Table of Contents

Traps and Report Formats

6700-A2-GB20-30

The COMSPHERE 6700 Series NMS supports several SNMP traps and reports.

COMSPHERE 6700 NMS alerts may be exported to authorized SNMP managers

as SNMP traps. Traps are forwarded for any event that makes it through the

COMSPHERE 6700 Series NMS's alert filter.

All traps are enterprise specific, with an OBJECT IDENTIFIER (OID) specifying

the COMSPHERE 6700 Enterprise Device product.

Trap forwarding can be turned on/off for each SNMP manager in the authorized

manager list through the COMSPHERE 6700 Series NMS Network Configuration

feature or via SNMP. To do so, refer to the COMSPHERE 6700 Series Network

Management System Network Configuration Guide .

Traps may be:

Configured to operate in Mode 1 or Mode 2.

— Use Mode 1 with Release 1 for compatibility with previous SNMP Proxy

Agent releases and with the DCE Manager Proxy Agent Interface (UNIX

platform).

— Use Mode 2 with Release 2 for additional traps, filtering, more

information, and serialization.

Individually filtered for each manager through the NMS Alarm MIB group in

Mode 2 only.

The COMSPHERE 6700 Device MIB variable bindings are dependent on the

specific trap and Trap Mode.

Table 3-1,

Mode 1 Traps

Table 3-2,

Mode 2 Traps

Table 3-3,

Mode 2 NMS Events and Status

September 1998

3-1

Table of Contents