Table of Contents
Advertisement
12. Security Commands
RTRV-USER-SECU
The RTRV-USER-SECU command retrieves the security levels for a specified
user. The user's password cannot be retrieved.
Table 12-13. RTRV-USER-SECU Command Parameters
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
After the above response, a new command input may be generated.
Normal Response:
M
;
Error Response:
M
;
12-14
RTRV-USER-SECU:[tid]:uid:[ctag][:];
RESTRICTIONS: All parameters in this command are position-defined.
[tid]
Identification of the target NE. The default value is null. The NE SID
code is the only other valid value.
uid
User Identification name (10 characters maximum). Input is
case-sensitive. ALL is supported.
[ctag]
Correlation tag (6 characters) maximum that links an input command
with associated output responses. The default is 0.
IP c
sid yy-mm-dd hh:mm:ss
c COMPLD
/* RTRV-USER-SECU:[tid]:uid:[ctag][:] */
"uid:uap:uid_nblk"
sid yy-mm-dd hh:mm:ss
c
DENY
/* RTRV-USER-SECU:[tid]:uid:[ctag][:] */
aid:ERRCDE=errcde
/* error description */
August 2002
4200-A2-GB20-00
Advertisement
Chapters
Table of Contents
