Show Class-Map - Cisco ME 3800X Command Reference Manual

show class-map

show class-map
To display quality of service (QoS) class maps, which define the match criteria to classify traffic, use the
show class-map command in user EXEC mode.
Syntax Description class-map-name
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.2(52)EY
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show class-map command:
Switch> show class-map
Class Map match-all videowizard_10-10-10-10 (id 2)
Match access-group name videowizard_10-10-10-10
Class Map match-any class-default (id 0)
Match any
Class Map match-all dscp5 (id 3)
Match ip dscp 5
Related Commands Command
class-map
match access-group
Cisco ME 3800X and ME 3600X Switch Command Reference
-34
show class-map [class-map-name] [ | {begin | exclude | include} expression]
(Optional) Displays the contents of the specified class map.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Description
Creates a class map to be used for matching packets to the class
whose name you specify.
Defines the match criteria to classify traffic.
Chapter
OL-28238-01