Debug Network-Clock - Cisco ME 3800X Command Reference Manual

debug network-clock

debug network-clock
To enable debugging of a SyncE network clock, use the debug network-clock command in Privileged
EXEC mode. To disable debugging, use the no form of this command.
Syntax Description
error
event
pal
sm
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
15.1(2)EY
Usage Guidelines
Examples The following example shows how to enable SyncE network clock debugging:
Switch# deb network-clock ?
error
event
pal
sm
Switch# deb network-clock error
Related Commands Command
show debugging
Cisco ME 3800X and ME 3600X Switch Command Reference
B-14
debug network-clock [error] [event] [pal] [sm]
no debug network-clock [error] [event] [pal] [sm]
Network clock error debugging
Network clock event debugging
Network clock PAL debugging
Network clock state machine debugging
Modification
This command was introduced.
Network clock error debugging
Network clock event debugging
Network clock PAL debugging
Network clock state machine debugging
Description
Displays information about the types of debugging that are enabled.
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
OL-28238-01