debug ip igmp max-groups
debug ip igmp max-groups
To enable debugging of Internet Group Management Protocol (IGMP) maximum groups events, use the
debug ip igmp max-groups command in privileged EXEC mode. To disable debugging, use the no form
of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(52)EY
Usage Guidelines
The undebug ip igmp max-groups command is the same as the no debug ip igmp max-groups
command.
Related Commands
Command
show debugging
Cisco ME 3800X and ME 3600X Switch Command Reference
B-8
debug ip igmp max-groups
no debug ip igmp max-groups
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B
Cisco ME 3800X and ME 3600X Switch Debug Commands
OL-28238-01