Debug Sw-Vlan Ifs - Cisco ME 3800X Command Reference Manual

debug sw-vlan ifs

debug sw-vlan ifs
To enable debugging of the VLAN manager IOS file system (IFS) error tests, use the debug sw-vlan ifs
command in privileged EXEC mode. To disable debugging, use the no form of this command.
Syntax Description
open {read | write}
read {1 | 2 | 3 | 4}
write
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(52)EY
Usage Guidelines The undebug sw-vlan ifs command is the same as the no debug sw-vlan ifs command.
When selecting the file read operation, Operation 1 reads the file header, which contains the header
verification word and the file version number. Operation 2 reads the main body of the file, which
contains most of the domain and VLAN information. Operation 3 reads type length version (TLV)
descriptor structures. Operation 4 reads TLV data.
Related Commands Command
show debugging
show vlan
Cisco ME 3800X and ME 3600X Switch Command Reference
B-32
debug sw-vlan ifs {open {read | write} | read {1 | 2 | 3 | 4} | write}
no debug sw-vlan ifs {open {read | write} | read {1 | 2 | 3 | 4} | write}
Displays VLAN manager IFS file-open operation debug messages. The
keywords have these meanings:
• read—Display VLAN manager IFS file-read operation debug messages.
• write—Display VLAN manager IFS file-write operation debug messages.
Displays file-read operation debug messages for the specified error test (1, 2,
3, or 4).
Displays file-write operation debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays the parameters for all configured VLANs or one VLAN (if the
VLAN name or ID is specified) in the administrative domain.
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
OL-28238-01