Cisco ME 3800X Command Reference Manual page 439

Chapter
cef type
config
copy-config
cpu threshold
entity
envmon [fan |
shutdown | status |
supply | temperature]
ether oam
ethernet
flash
hsrp
ipmulticast
mac-notification
change
move
mpls
threshold
msdp
ospf [cisco-specific |
errors | lsa | rate-limit |
retransmit |
state-change]
OL-28238-01
(Optional) Displays Cisco Express Forwarding (CEF) traps. You can
optionally enter one of these keywords:
inconsistency—Enables SNMP CEF inconsistency traps.
•
peer-fib-state-change—Enables SNMP CEF peer FIB state-change
•
traps.
peer-state-change—Enables SNMP CEF peer state-change traps.
•
resource-failure—Enables SNMP CEF resource-failure traps.
•
(Optional) Enables SNMP configuration traps.
(Optional) Enable SNMP copy-configuration traps.
(Optional) Allows CPU-related traps.
(Optional) Enables SNMP entity traps.
Optional) Enables SNMP environmental traps. The keywords have these
meanings:
fan—(Optional) Enables fan traps.
•
shutdown—(Optional) Enables environmental monitor shutdown traps.
•
status—(Optional) Enables SNMP environmental status-change traps.
•
supply—(Optional) Enables environmental monitor power-supply traps.
•
temperature—(Optional) Enables environmental monitor temperature
•
traps.
(Optional) Enables Ethernet OAM traps.
(Optional) Enables SNMP Ethernet traps.
(Optional) Enables SNMP flash notifications.
(Optional) Enables Hot Standby Router Protocol (HSRP) traps.
(Optional) Enables IP multicast routing traps.
(Optional) Enables MAC address notification traps.
(Optional) Enables MAC address change notification traps.
(Optional) Enables MAC address move notification traps.
(Optional) Enables multiprotocol label switching (MPLS) traps.
(Optional) Enables MAC address table threshold traps.
(Optional) Enables Multicast Source Discovery Protocol (MSDP) traps.
(Optional) Enables Open Shortest Path First (OSPF) traps. The keywords
have these meanings:
cisco-specific—(Optional) Enables Cisco-specific traps.
•
errors—(Optional) Enables error traps.
•
lsa—(Optional) Enables link-state advertisement (LSA) traps.
•
rate-limit—(Optional) Enables rate-limit traps.
•
• retransmit—(Optional) Enables packet-retransmit traps.
• state-change—(Optional) Enables state-change traps.
Cisco ME 3800X and ME 3600X Switch Command Reference
snmp-server enable traps
-5