Logging File - Cisco ME 3800X Command Reference Manual

Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands

logging file

To set logging file parameters, use the logging file command in global configuration mode. To return to
the default setting, use the no form of this command.
Syntax Description
filesystem:filename
max-file-size
min-file-size
severity-level-number
type
Defaults
The minimum file size is 2048 bytes; the maximum file size is 4096 bytes.
The default severity level is 7 (debugging messages and numerically lower levels).
Command Modes Global configuration
Command History Release
12.2(52)EY
OL-28238-01
logging file filesystem:filename [max-file-size [min-file-size]] [severity-level-number | type]
no logging file filesystem:filename [severity-level-number | type]
Alias for a flash file system. Contains the path and name of the file that
contains the log messages.
The syntax for the local flash file system:
flash:
(Optional) Specifies the maximum logging file size. The range is 4096 to
2147483647.
(Optional) Specifies the minimum logging file size. The range is 1024 to
2147483647.
(Optional) Specifies the logging severity level. The range is 0 to 7. See the
type option for the meaning of each level.
(Optional) Specifies the logging type. These keywords are valid:
•
•
•
•
•
•
•
•
Modification
This command was introduced.
emergencies—System is unusable (severity 0).
alerts—Immediate action needed (severity 1).
critical—Critical conditions (severity 2).
errors—Error conditions (severity 3).
warnings—Warning conditions (severity 4).
notifications—Normal but significant messages (severity 5).
information—Information messages (severity 6).
debugging—Debugging messages (severity 7).
Cisco ME 3800X and ME 3600X Switch Command Reference
logging file
2-143