Show Access-Lists - Cisco ME 3800X Command Reference Manual

show access-lists

show access-lists
To display access control lists (ACLs) configured on the switch, use the show access-lists command in
privileged EXEC mode.
Syntax Description name
number
hardware counters
ipc
| begin
| exclude
| include
expression
Note Though visible in the command-line help strings, the rate-limit keywords are not supported.
Command Modes Privileged EXEC
Command History Release
12.2(52)EY
Usage Guidelines The switch supports only IP standard and extended access lists. Therefore, the allowed numbers are only
1 to 199 and 1300 to 2699.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Cisco ME 3800X and ME 3600X Switch Command Reference
-26
show access-lists [name | number | hardware counters | ipc] [ | {begin | exclude | include}
expression]
Modification
This command was introduced.
(Optional) Name of the ACL.
(Optional) ACL number. The range is 1 to 2699.
(Optional) Displays global hardware ACL statistics for switched and
routed packets.
(Optional) Displays Interprocess Communication (IPC) protocol
access-list configuration download information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Chapter
OL-28238-01