Cisco ME 3800X Command Reference Manual page 158

lacp port-priority
Examples This example shows how to configure the LACP port priority on a port:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# lacp port-priority 1000
Related Commands Command
channel-group
lacp system-priority
show lacp [channel-group-number]
internal
Cisco ME 3800X and ME 3600X Switch Command Reference
2-134
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
Description
Assigns an Ethernet port to an EtherChannel group.
Configures the LACP system priority.
Displays internal information for all channel groups or for
the specified channel group.
OL-28238-01