Show Parser Macro - Cisco ME 3800X Command Reference Manual

show parser macro

show parser macro
To display the parameters for all configured macros or for one macro on the switch, use the show parser
macro command in user EXEC mode.
Syntax Description brief
description [interface
interface-id]
name macro-name
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(52)EY
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is a partial output example from the show parser macro command:
Switch# show parser macro
Total number of macros = 2
--------------------------------------------------------------
Macro name : sample-macro1
Macro type : customizable
duplex full
speed auto
mdix auto
--------------------------------------------------------------
Macro name : test1
Macro type : customizable
no shutdown
flowcontrol receive on
speed 100
--------------------------------------------------------------
Cisco ME 3800X and ME 3600X Switch Command Reference
-130
show parser macro [{brief | description [interface interface-id] | name macro-name}] [ | {begin
| exclude | include} expression]
(Optional) Displays the name of each macro.
(Optional) Displays all macro descriptions or the description of a specific
interface.
(Optional) Displays information about a single macro identified by the
macro name.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter
OL-28238-01