Show Policy-Map - Cisco ME 3800X Command Reference Manual

show policy-map

show policy-map
To display quality of service (QoS) policy maps, which define classification criteria for incoming and
outgoing traffic and the actions to be performed on the classified traffic, use the show policy-map
command in user EXEC mode.
Syntax Description
policy-map-name
control-plane [all]
interface [interface-id]
[input | output]
class class-name
service instance number
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(52)EY
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco ME 3800X and ME 3600X Switch Command Reference
-132
show policy-map [policy-map-name | control-plane [all] | interface [interface-id]] [input |
output] [class class-name] | [service instance number]] [ | {begin | exclude | include}
expression]
(Optional) Displays the specified policy-map name.
(Optional) Displays the control plane policy or all control plane policies.
(Optional) Displays information and statistics about policy maps applied
to all ports or the specified port.
•
(Optional) If you specify control plane or a port, you can specify additional
keywords.The keywords have these meanings:
•
•
(Optional) Displays policy-map statistics for an individual class.
(Optional) Displays policy map information for a service instance. The
service instance number range is from 1 to 4294967295.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
interface-id—Displays information about policy maps on the specified
physical interface.
input—Displays information about input policy maps on the switch or
applied to the specified port.
output—Displays information about output policy-maps on the
switch or applied to the specified port.
Chapter
OL-28238-01