Cisco ME 3800X Command Reference Manual page 252

random-detect cos
Examples In the following example, WRED has been enabled using the random-detect cos command. With the
random-detect cos command, the CoS value has been specified, along with the minimum and maximum
thresholds, and the maximum probability denominator.
Switch> enable
Switch# configure terminal
Switch(config)# policy-map policymap1
Switch(config-pmap)# class class1
Switch(config-pmap-c)# random-detect cos 1 12 25 1/10
Switch(config-pmap-c)# end
Related Commands Command
random-detect
cos-based
Cisco ME 3800X and ME 3600X Switch Command Reference
2-228
Chapter 2
Description
Enables WRED on the basis of the CoS value of a packet.
Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
OL-28238-01